Technical Specification
Main Features
Active DI Box
Phantom or battery powered (1 x PP3 9V – Not included)
Input connectors are both 1/4″ jack sockets and an XLR socket
Output Ground Lift Switch
Rugged aluminium extrusion case
Arched case allows cables to run back underneath
- Inputs
- Input Impedance: 1 MOhm (pad at 0dB), 47 kOhm (pad at -20dB or -40dB)
- Max Input: +9dBu (pad at 0dB), +29dBu (pad at -20dB), +49dBu (pad at -40dB)
- Input Connectors: Two Parallel 1/4″ jack connectors (Tip Hot +ve, Sleeve ground), and a parallel XLR connector (unbalanced) (Pin 2 Hot +ve, Pin 1 & 3 ground)
- Outputs
- Output: Transformer Balanced
- Max Output: +8dBu into 600 Ohms or greater
- Output Connectors: XLR3-32 or equivalent
- THD: < 0.005% at 1khz, 0dbu output
- Noise: < -105db unweighted, 22hz-22khz, rms*
- Frequency Response: 30Hz to 20kHz, +0dB/-1dB
- Main/Standby battery: 9 volt PP3 type, preferably alkaline
- Power Consumption: on phantom: less than 7.5mA, on battery: less than 2mA.
- Phantom Power: +20 volts DC to +48 volts DC
- Phyiscal & Dimensions
- Unit Weight: 650 gms, excluding batteries
- Dimensions: 59 mm x 124 mm x 143 mm (2.3″ x 4.9″ x 5.6″)