In-ear monitoring set: ear-canal phones with various ear-fitting pads, adaptive diversity receiver for high reception quality. Remote-controllable via “Wireless Systems Manager”.
Hear better, perform better. Sennheiser monitoring systems are trusted by professionals worldwide and now are better than ever. Featuring an adaptive-diversity receiver, the receiver pack uses the headphone cable as a secondary antenna for flawless reception. Ear-canal phones, with various ear-fitting pads for an individual fit, reproduce the signal from the adaptive diversity receiver precisely and faithfully. Pass-through outputs allow easy splitting of the input signal to travel to other devices. Lastly, the entire set can be monitored and remotely controlled with Sennheiser’s “Wireless Systems Manager” software due to the built-in Ethernet port on the stereo transmitter.
Tech Specs
General Compander: HDX Audio-XLR connector: 2 x XLR-3 jack Presets: 16 Frequency response: 25 – 15000 Hz THD, total harmonic distortion: < 0,9 % Signal-to-noise ratio: > 90 dB(A) RF frequency range: 516…865 MHz RF output power: 10/30 mW Transmission/receiving frequencies: 1680 Switching bandwidth: 42 MHz Peak deviation: +/- 48 kHz In compliance with: ETS 300422, ETS 300445, CE, FCC Modulation: FM, MPX-stereo Antenna connector: BNC Headphone connector: > 100mW (32 Ω) Input voltage range: + 22 dBu max Audio-Output-Power: 100 mW (32 Ω) Operating voltage (stand alone): 12 V DC nom.